Marine Brokers & Consultants
Specializing in the sale of commercial marine vessels and equipment.
Head on over to the Subscribe Page if you would like updates on New and or changes on our Listings.
Our Most Recent Featured Items
B2391
B2391 2000 24′ x 8′ Pontoon Work Barge w/Trailer SOLD! YOU JUST MISSED IT! GRT: 0.84 Built by Fabritek Aluminum deck, steel frame, plastic pontoons Reported to be in fair condition
M2129
2010 Hi-Tide Boatlift 80,000 lb Capacity Price: $45,000 USD Fully dismantled Owner purchased a larger vessel in 2012 Has been kept in indoor storage Located in Southern Ontario Details are deemed to
P2460
P2460 1972 52′ x 16′ Twin Screw Hike Built Steel Cruiser/Trawler ***DEAL PENDING*** She’s a spacious boat with great lines and requires some work to be completed. Contact us for more
W2447
1992 21′ x 8′ Modified SeaArk Aluminum Work Boat – Engine Needs Repair Price: $17,500 USD Note: The engine on this work boat needs to be repaired Last used June 2024 Hull is SeaArk,
C2076
C2076 1993 30′ x 11′ Hike Aluminum Crew/Dive/Work Boat w/ Built-in Commercial Diving System NEW PRICE: $125,000 USD This versatile Hike boat with great lines is in great shape, has
W2446
1966 35′ x 10′ Russel Brothers Work Boat – Project Boat Price: $15,000 CDN This Russel Brothers Hull #1232 might just be the project for you! GRT: 7.22, NRT: 5.73 Vessel weighs
W2445
1952 37’6 x 10′ Russel Brothers Work Boat – Needs Work Price: $22,000 CDN This Russel Brothers Hull #999 might just be the project you’ve been looking for! GRT: 7.64, NRT: 5.73
B2389
B2389 2017 Aluminum Sectional Barge – 37’11 x 16’6 x 3’8 SOLD! This 2 section barge is built to the highest spec, is stackable, truckable and ready for your next project.
H2020
H2020 1913 106′ x 21′ Historic Houseboat Call for Pricing Large Historic 106 ft. Houseboat for Sale This is an old houseboat, located in the 1000 Islands region. It was built in the era of
W2417
W2417 2023 16’6 x 6′ Steel Workboat SOLD! YOU JUST MISSED IT! 12 gauge bottom, 14 gauge sides 20″ transom Epoxy primed and painted Makes the perfect little run-about! Located in Port
PV2278
PV2278 1989 66′ x 20′ Steel 100 Passenger Boat Built by Kanter Yachts New Price: $450,000 CDN Draft 4’6″ GRT: 124.49 Net: 75 Class: Inland Waters Class II 100 passengers + 15
FE2048
FE2048 24″ Kennedy Net Lifter SOLD! YOU JUST MISSED IT!! Location: Northern Ontario Details are deemed to be correct but are not guaranteed and should be independently verified. Please
B2390
B2390 1965 105′ x 24′ Steel Dump Scow Call For Pricing She could use some fresh paint, but she’s ready to get to work! 350 cubic yard capacity 9’ depth from inside 9 waterproof
W2441
1992 28′ x 10.3′ MetalCraft Aluminum Crew/Dive/Work Boat w/Tri-Axle Aluminum Trailer New Price: $60,000 CDN She’s got tons of room and is ready for work or play! GRT: 9.89, NRT:
A2098
A2098 3000 lb Danforth Anchor SOLD! Not slightly clean, ABSOLUTELY CLEAN! No bends, no welds, in excellent condition Measurements: The length of the crossbar is 7′ 6″ The diameter of the
P2444
P2444 2003 57′ x 18′ x 6.5′ Steel Custom Built Trawler/Liveaboard Gross tonnage: 53.08 tons Net tonnage: 39.81 tons Shell plate thickness: 1/4″ Framing: 2″ x 3/8″ Bulkheads: 4 – 3/16″ plate
B2388
B2388 Sectional Barges, Rake Ends, Spuds, Wells and Winches for Lease or Purchase Competitively Priced Compatible with Poseidon sectionals Call for availability and pricing for: 10′ x 40′
PR2228
PR2228 RH, 26.5″ Diameter x 16″ Pitch, 5-Blade, Bronze, Unused Prop Price: $6,500 CDN Location: Manitoulin Island, Ontario Details are deemed to be correct but not guaranteed and should
LC2146
2023 30′ x 10′ Aluminum Landing Craft Powered by Suzuki c/w Trailer PRICE: $208,000 CDN Powered by 2023 Suzuki DF300apx w/ precision controls 39 mph top speed at 5600 rpm 3/16″
T2431
T2431 1952 45′ x 13′ Roamer Subchapter M Compliant Model Bow Tug New Price: $169,000 USD Meet the new workhorse for your fleet! She’s ready to get to work and she’ll get the
P2461
P2461 1947 20′ x 6’7″ Classic Chris Craft Custom Runabout c/w Trailer Price: $72,500 CDN She’s a head turner in show room condition, all original and only 6 hours on the
E2778
E2778 Pair of Perkins Perama M35 Marine Engines w/Gears Price:$4k CDN each or $7k CDN for the pair GRTO from 40 trawler These engines come with gearboxes, wire harnesses, hour meters and gauges
W2442
1984 44′ x 12′ Aluminum Crew/Work Boat Price: $37,000 CDN Powered by twin Cummins V504 MRH Borg Warner gears Fuel capacity 300 gal 3/16″ shell plate
D2139
D2139 2023 10″ Horizontal Auger Dredge Price: $185,000 CDN New hydraulic pump Completely rebuilt engine 5.9 Cummins Completely rebuilt dredging pump 10″ Stainless steel pontoons Located in
B2387
B2387 1956 220′ x 43′ x 14′ Barge Price: $310,000 CDN Max cargo capacity about 4,000 tonnes GRT: 883 Location: Quebec, Canada Details are deemed to be correct but are not guaranteed
T2435
T2435 1957 42′ x 12’6 Mathieson Built Tug Powered by CAT Price: $160,000 CDN Built by Mathieson Welding Service, Goderich, Ontario GRT: 10, NRT:6.8 Draft is 3’6″ Powered by
T2434
T2434 1951 42′ x 13′ Mathieson Built Tug Powered by CAT Price: $160,000 CDN You just found the next work horse for your fleet! Built by Mathieson Welding Service, Goderich, Ontario GRT:
P2459
P2459 1955/1996 40′ x 10′ x 4′ Steel Cruiser/Trawler w/Russel Brothers Hull Comes w/Trailer Price: $50,000 CDN This trawler combines the classic lines of a Russel Brothers hull
T2433
T2433 1965 34.8′ x 13.3′ Steel Push Tug Powered by Caterpillar SOLD! WHY DID YOU WAIT SO LONG??? GRT: 19, NRT:13 Molded depth: 5.1′ Powered by Caterpillar D333 (1963) Gear is CAT
M2128
17th Century Ship Cannon Price: $30,000 USD We have a true unicorn here. This is a 4 pound, iron long gun that spent centuries at the bottom of the sea, and was recovered intact. It measures
P2446
P2446 1980/2003 26′ x 9′ x 33″ Custom Built Steel Trawler/Tug SOLD! THIS BOAT HAS BEEN LAID UP FOR A FEW YEARS AND IS BEING SOLD AS IS Built in Ontario by Wray Brown, this vessel
P2451
P2451 2002 39′ x 13′ Steel Pleasure Tug SOLD! You missed the boat! She’s off to a new home!! Draft is 4.5′ Powered by Detroit Diesel 6-71 Gear is MG 509 2.48:1 Cruising
B2385
B2385 2013 40′ x 14′ Steel Spud Barge w/Crane (Sides Fold for Trucking!) SOLD! The fold-up sides on this handy crane barge make it truckable Shell plate thickness 1/4″ Sides are
P2457
P2457 1980 48′ x 13′ 6 Twin Screw Steel Cruiser/Trawler Price: $100,000 CDN Scroll down for the YouTube video walk through! Draft: 44″ Shell plate thickness: 1/4″ NRT: approx
E2777
E2777 Cummins 5.9 6BT Turbo Marine Engines LH & RH Price: $50,000 CDN for the pair Completely rebuilt, 1/2 hour test time 1 has hydraulic steering pump and tank Both equipped with rebuilt 12V
CR2100
CR2100 Dragline Fairlead Price: $4,000 USD Can easily be adapted to marine use 20″ diameter sheaves, grooved for 1.5″ wire 2 rollers are 24″ x 5″ 2 top and bottom rollers are
E2776
E2776 Detroit Diesel 8V 92 Natural Marine Engines LH & RH Price: $7,500 CDN each Good runners Removed from a buoy tender Pay & Brinck gears, model PB130, ratio is 3:1 Located in: Port Dover,
W2437
2021 25′ x 6’8 Steel & Aluminum Work Boat w/200 hp Evinrude and Trailer New Price: $50,000 CDN This is the one you’ve been waiting for! Steel hull with aluminum pilot house and
WANTED
Here are some of the things our clients are looking for. If you have surplus inventory or assets you no longer use, why not let us find them a new home! Head on over to the Subscribe Page if you
G2331
G2331 CAT 3508 Marine Genset (Needs a camshaft) Price: $25,000 CDN or best offer 3 phase 600 v 1800 RPM Needs a camshaft Location: Near Hamilton, Ontario Details are deemed to be correct but are not
SB2051
SB2051 1983 Kirby 30 Performance Sailboat Price: $10,500 CDN This performance sailboat, designed by the legendary Bruce Kirby, is a perfect blend of speed, performance and agility, AND she’s
T2406
T2406 64′ x 18′ 1100 hp Tug with Retractable Wheelhouse New Price: $69,900 USD With great lines and loads of power, she’s ready to go, go, go! Modernized in the
EG2276
EG2276 (2) Tonanco Marine Gears – TM7295, 2.5:1 ***SOLD*** Running take outs Off of 6-71 Detroits Located in New York State Details are deemed to be correct but are not guaranteed and should be
W2440
1988 22′ x 10’10” Zodiac Hurricane MK7 w/Tandem Trailer Price: $20,000 CDN or best offer Volvo Penta 41 series diesel engine, test run late fall 2023 (runs excellent) Boat has foam
EP2039
12-71 or 12-92 Tanks and Raw Water Pump w/Extra Impellers Price: $6,000 CDN for the lot One tank is set up for keel cooling The other has a heat exchanger core in it One rebuilt Jabsco raw water pump
EP2038
(2) New Jabsco Water Pump Impellers Price: $600 CDN for the pair (compare at $500 USD each!) Jabsco part number 2999-0001 Location: Port Dover, Ontario Please contact us for further information
E2774
E2774 Caterpillar 3408B Industrial Engine New Price: $15,500 CDN Or Best Offer 402 hp Excellent running takeout Removed from a barge 1438 hours Has hydraulic governor Serial No 67U15138 402 hp Run Dec
G2328
G2328 Caterpillar 3304 Diesel Marine Genset 125 KVA, 660/347 v Price: $18,000 CDN 66 hours Removed from a Great Lakes ship (ship emergency service) 125 KVA 1800 rpm 60 hz 3 phase Location: Port
E2757
E2757 Harbormaster Unit – Excellent Condition New Price: $35,000 CDN or best offer 6-71 Detroit Diesel Allison Hydraulic Gear Low hours Very well maintained 12 volt alternator and starter Keel
WH2110
WH2110 Timberland 5 Drum Mechanical Winch Price: $15,000 CDN or best offer Model 400-7-252-TR Centre drum has a dog D 311 CAT power with a funk reversing drive Electric frictions Located in Port
PV2280
PV2280 1982 78′ x 23′ – 95 Passenger Steel Tour Boat Available September 1, 2024 Price: $840,000 CDN GRT: 140, NRT: 87 Draft 5′ Cruises at 7 -1 0 knots Powered by (2) Series
P2453
P2453 1986 55′ x 13.8′ x 4.8′ Steel Trawler/Liveaboard ***SOLD!*** Ready to see more? Click HERE for a virtual tour of your next home away from home! Formerly a Transport Canada
P2456
P2456 1996 28′ x 9’6 Pursuit 2800 WA w/ Trailer New Price: $59,000 CDN Walk around design 30′ OAL 32″ Draft Twin HE cooled Crusader 350XL low hours, just over 400 light hours
EG2282
EG2282 Twin Disc MG509 3:1 Price: $20,000 CDN Good runner Removed from Volvo Penta MD 100 BK Belleville, Ontario Details are deemed to be correct but are not guaranteed and should be independently
EG2281
EG2281 Twin Disc MG509 2:1 Price: $8,500 USD Good runner Low hours Recent rebuild Very clean inside Nice gears Off of a Detroit Diesel 6-71N Windsor, Ontario Details are deemed to be correct but are
P2421
P2421 1960 127′ x 28′ x 10′ Russel Brothers Steel Converted Ex CCG Vessel/Liveaboard Yacht SOLD Has been used as a training, expedition, research vessel AND home away from home!
B2381
B2381 1948 (4) 10′ x 7′ x 50′ Sectional Barges SOLD! Shell plate thickness 3/8″ GRT: 26 Good condition Winch is American 50 B, powered by a Wisconsin V4 gas engine
PV2206
FileNo. PV2206 1997 57′ x 16’9 Steel Fishing Charter Boat – Overnight Accommodations New Price: $350,000 CDN Gross tonnage: 62 tons Net tonnage: 47 tons Builder: Wray Brown
EP2037
Walter Keel Coolers – 2 sizes available 3 are from 6-71 Detroit Diesels $3,500 USD each 2 are from 12-71 Detroit Diesels $5,000 USD each Location: New York State Please
B2386
B2386 2022 40′ x 18′ Sectional Barge w/ Ramp Price: $199,000 CDN ***NOT AVAILABLE UNTIL MID SEPTEMBER 2024*** 2 sections 40′ x 9′ x 46″ high Ramp measures 14′
B2382
B2382 2021 27′ x 8’6 Steel Dump Barge Price: $87,000 USD Dump Box measures 12′ x 7′, capacity about 5,000 lbs Honda gas powered hydraulic power pack 90 hp Mercury
B2347
B2347 New (6) 8′ x 20′ x 4′ Sectional Barges Price: $156,000 CDN for all 6 Or – Make an offer if you’re interested in less than all 6 Shugart style Unused Capacity
E2759
E2759 2 Man Marine V10 Diesel Engines with Gears SOLD! Engine model D2840LXE Removed from a 65′ yacht Good running take outs Come with ZF gears Located in: South Carolina Details are deemed to
B2383
B2383 2018 50′ x 12′ x 5′ Steel Barge w/ Ramp and Spuds SOLD! Shell plate thickness 1/4″ Capacity approx 70,000 lbs 2 ramps 12′ x 2′ 4 spuds 2 bulkheads – 3
G2330
G2330 750 kW Kohler Genset w/16v92 Detroit Diesel Price: $8,500 CDN 3 phase 480 v Newer Panelsource control panel Powered with a 2008 model Detroit Diesel 16v92 powerplant Low hours, good runner but
SB2049
SB2049 1986 Peregrine 30 Racer/Cruiser Sailboat w/Trailer SOLD! Though her completion was cut short, this beauty is so close to being ready to go! Some elbow grease and your vision to customize the
FV2163
FV2163 1982 36′ x 10′ Steel Trapnetter/Workboat SOLD! Draft 2′ Gross Tons: 8.14 Powered by 135 hp Perkins Diesel (2015) Cruises at 6 knots Fuel capacity: 400 litres Electronics:
W2424
W2424 2001 19′ x 8’6 SeaArk Aluminum Work Boat (no motor) Comes With Trailer Price: $20,000 USD Motor has been removed (had a 225 hp Mercury Optimax) 18″ draft 4 picking eyes
E2770
E2770 2 Detroit Diesel 12-71 Marine Diesel Engines SOLD! Good running take outs ready for your latest re-powering job! Keel cooled Fleet maintained in a state run ferry Located in: New York State
P2455
P2455 2023 45′ x 11.5′ Steel Pleasure Trawler Price: $79,000 CDN She’s got great lines and loads of room! 4′ Draft Powered by Caterpillar 3406B, 350hp, completely rebuilt
G2329
G2329 Detroit Diesel 8-92 Marine Genset Price: $30,000 USD 700 hours Supercharged and Turbocharged Demand start 330 kw 480V 3 phase 60 hz Was a standby generator Good runner Has heat exchanger
EP2036
Fernstrum Keel Coolers – New – 2 sizes available Model D1672 Price $13,000 CDN Model BN842B Price $4,000 CDN Location: Near Port Dover, Ontario Please contact us for further
M2127
Solid Red Brass Portholes Price: $3,500 CDN each Gorgeous rare red brass porthole (she’s heavy!) Outside diameter 20.5″ x 3.5″ Solid yellow brass dogs Location: Port Dover,
M2126
Solid Brass Portholes Price: $1,000 CDN each Solid brass (she’s heavy!) Outside measurements: 18.5″ x 24.5″ x 3.5″ Glass measures 19.5″ x 13.5″ Location: Port
E2738
E2738 12V92 Detroit Diesel SOLD! Core engine was driving a generator 305 hours on meter 700 hp @ 2100 rpm Heat exchanger cooled Located in: Southern Ontario (Port Dover) Details are deemed to be
FV2157
FV2157 71′ x 18.5′ x 6′ Great Lakes Commercial Fishing Vessel Price: $65,000 CDN Powered by Volvo 120A ( 270 to 290 hp) Capital Gear 3.88:1 ratio 44” x 40” 4 blade RH propeller 3 ½”
G2325
G2325 CAT 3406B 600V Marine Gensets – 2 available SOLD! 10,000 hours Location: Southern Ontario Details are deemed to be correct but are not guaranteed and should be independently verified.
W2430
1960 50′ x 15.5′ x 5.5′ Steel Double Bottom Work/Cargo Tug Built by Hike Metals, Wheatley, Ontario SOLD Last survey 2019 Gross tonnage: 17.24 tons Net tonnage: 11.74 tons
PR2189
PR2189 RH, 36″ x 45″, Veem, 5 blade, 3″ bore SOLD! Location: Port Dover, Ontario Details are deemed to be correct but not guaranteed and should be independently verified. Please
E2773
E2773 Detroit Diesel 6-71N 4V Truck Engine Price: $3,500 CDN Good runner Located in: Windsor, Ontario Details are deemed to be correct but are not guaranteed and should be independently verified. .
G2327
G2327 Westerbeke 4.4 kw Diesel Marine Genset Price: $3,500 USD Complete less panel 450 hours Mounts, strainer, Racor, etc Location: Windsor, Ontario Details are deemed to be correct but are not
EG2280
EG2280 Twin Disc MG509 1.45:1 Price: $3,500 CDN Should be overhauled Port Dover, Ontario Details are deemed to be correct but are not guaranteed and should be independently verified. marine gear for
A2096
A2096 30 kg New Danforth Anchors Price: $75 CDN each Galvanized steel Located in Port Dover, Ontario Details are deemed to be correct but are not guaranteed and should be independently verified.
E2756
E2756 Detroit Diesel 16-71T Engine Price: $4,000 CDN Good running take out Removed from a generator 1550 original hours Located in: Port Dover, Ontario Details are deemed to be correct but are
P2452
P2452 1947/2022 40′ x 15′ Steel Pleasure Tug SOLD! You just missed her! Draft 4’6 Bottom painted in fall of 2022 Cruises at 6.5 – 7 knots Powered by Volvo D-50, 1961, 90
D2120
File No. D2120 Mudcat MC915 Auger Dredge Price: $132,500 CDN Construction material – Steel Length : 38’ 11″ Width : 9′ 0″
FV2157
FV2157 71′ x 18.5′ x 6′ Great Lakes Commercial Fishing Vessel Price: $65,000 CDN Powered by Volvo 120A ( 270 to 290 hp) Capital Gear 3.88:1 ratio 44” x 40” 4 blade RH propeller 3 ½”
G2326
G2326 Stamford/Detroit Diesel 600 V Genset Price: $5,500 CDN 151 Amp, 600V, 3 phase 1823 hours Used as a standby genset Government maintained Skid mounted 12 wire alternator end Copper windings
T2428
T2428 1946 45′ x 14′ Twin Screw Ex-Army Tug ***DEAL PENDING*** Draft: Approx. 5′ Engines: Detroit Diesel 6-71, keel cooled, 220 hp each Engines run well, check out the video below
FV2164
FV2164 1938 57′ x 14.5′ Great Lakes Fishing Vessel SOLD! 5′ draft This beauty has been lovingly restored, needs absolutely nothing and the owner will personally deliver her to her
W2425
W2425 1988 28′ x 8’6 Aluminum Work/Crew Boat Price: $35,000 USD Runs and drives 3′ draft Twin Mercruiser 5.7 MPI Bravo 2 outdrives Electronic shifters Dual steering stations
M2125
Bronze Kerfort Marine Windows Price: Make an Offer! (2) 20″ x 27″ 1/2 opening (1) 25″ x 30″ fixed (non-opening) (3) 25″ x 30″ fully opening Location: New York
W2428
W2428 1982 41′ x 14′ Twin Screw Aluminum UTB/ Workboat/Pilot Boat Price: $130,000 CDN She’s got nice lines and loads of space! GRT: 14.99 Former Coast Guard and Toronto Fire boat
W2435
1989 25′ x 9’6 300 hp Parker Tow/Workboat w/Trailer SOLD! YOU WAITED JUST A SMIDGE TOO LONG!! This Parker’s got great lines, tons of room and she can go, go, go! Draft is
P2454
P2454 1983 30′ x 9′ Welded Steel Motor Boat Project Boat Price: $9,500 CDN or Best Offer This project boat has nice lines and loads of potential! 3′ Draft Built by Kettle Creek Boat
LC2144
2005 22′ x 8’6 Aluminum Stanley Pulsecraft Landing Craft SOLD! YOU JUST MISSED IT! Powered by Evinrude E-TEC 175hp, 2012 Cruising speed 25 mph Draft about 1′ Capacity at least 1 ton
SB2048
SB2048 1979 Goderich 35′ w/trailer SOLD! YOU JUST MISSED IT!! Refurbishing this vessel was cut short and she’s ready for re-power and the custom interior you dream up! 35’8″ x
CR2101
CR2101 1961 Drott 20 Ton Cherry Picker w/Rebuilt Engine New Price: $8,000 USD 105′ of boom PLUS a 20′ jib 6 cylinder International motor totally rebuilt 10 years ago Located in Illinois
P2443
P2443 1954 40′ x 12’6 Classic Steel Trawler SOLD! YOU WAITED JUST A LITTLE TOO LONG!! Draft 5’3 Gross Tons: 16, Net: 11 Built in Marinette, Wisconsin Powered by CAT 3208, keel
PR2226
PR2226 LH/RH, 26″ x 20″, 3 Blade, Bronze Brass Propellers, 2″ Keyed Bore SOLD! Refurbished Location: Southern Ontario Details are deemed to be correct but not guaranteed and should
B2354
B2354 2018 180′ x 12′ Floating Bridge or 2 Barges with Ramps Price: $139,000 USD These custom units were designed as a bridge but could be used as 2
B2380
B2380 2022 10′ x 27′ Aluminum Crane Barge w/Trailer SOLD! This nearly new beauty that makes moving boat lifts and docks a breeze! Draft approx 1′ Plate thickness: deck is
W2436
2022 21′ x 7′ Wray Brown Aluminum Work Boat w/70 hp Suzuki and Trailer New Price: $45,000 CDN Meet the next great addition to your fleet! Built by Wray Brown Welded aluminum modified v
PR2227
PR2227 RH, 30″ x 25″, 2 1/2″ Bore, 3-Bladed, Kennedy Work Prop Price: $950 CDN Needs clean up Removed from a 38′ Russel Brothers tug Location: Windsor, Ontario Pickup only
W2422
W2422 1989 34′ x 10’5 Aluminum SeaArk Crew/Work/Dive Boat SOLD! YOU JUST MISSED IT!! 3′ draft Potential to be a great dive boat with stbd dive door and aft dive platform Twin Cummins
SP2106
SP2106 Leslie Tyfon Size 300 Air Horn SOLD! Max SWP 225 PSI Min SWP 125 PSI S/N 642479-3 Size 300 In rebuilt condition Located near Port Dover, Ontario, Canada Details are deemed to be correct
W2433
1987 23′ x 8.5′ Aluminum Workboat w/Trailer SOLD! YOU JUST MISSED OUT ON THIS ONE!! This handy little workboat is in excellent condition and she’s ready to go! GRT: 2.49 Powered by
P2448
P2448 1957 40′ x 12′ Matheson Trawler Tug SOLD! YOU JUST MISSED IT!! Draft is 4.75′ Converted dive boat, now a live aboard Steel hull 1/4″, house is 3/16″ aluminum
W2370
W2370 1980 26′ x 10.5′ Aluminum Work Boat Price: $25,000 CDN GRT: 7.68, NRT: 5.76 Draft: 3.3′ Powered by Volvo Penta Turbo Twin D3-160 A EVC-B, 2005, 160 hp, 320 hrs Transmission: SX
W2426
W2426 2005 36′ x 13’6 SeaArk Dauntless Aluminum Patrol/Work/Crew Boat SOLD! Classic Ray Hunt designed vessel with a deep-vee variable deadrise hull for a smooth ride Draft approx 4′
SP2237
SP2237 Steel Wheelhouse SOLD! 11’6 long x 80″ wide x 80″ high Located near Port Dover, Ontario Details are deemed to be correct but are not guaranteed and should be independently
B2378
B2378 2022 20′ x 8′ x 30″ Steel Barge with Ramps SOLD! YOU JUST MISSED IT!! 3/16″ construction Framed on 16″ 4 cleats Raked on one end Weight about 5,500 lbs Capacity
PV2276
PV2276 1986 90′ x 24′ – 250 Passenger Twin Deck Tour/Charter Vessel New Price: $995,000 CDN Last drydock 2023 90’4″ x 24′ GRT: 269, NRT: 230 Ideal for private and
P2442
P2442 1980 30′ x 10′ T-Craft Offshore 30 SOLD! YOU JUST MISSED IT!! Draft 2′ Fiberglass construction, this boat is in overall good condition and ready to go! Powered by Mercruiser
WH2117
WH2117 Ingersoll-Rand Air Tugger SOLD! Serial #18786 Size HU Located near Chicago, Illinois Details are deemed to be correct but are not guaranteed and should be independently verified.
E2771
E2771 2 Detroit Diesel 4-71 Marine Diesel Engines w/2:1 Gears SOLD! Heat exchanged 2:1 Allison gears Low hours Good Runners Removed from a yacht Located in: New York State Details are deemed to be
EG2275
EG2275 (2) Twin Disc Marine Gears – MG 5061-A, 2.47:1 SOLD! Running take outs Off of 3116 CAT Engines Located in New York State Details are deemed to be correct but are not guaranteed and should
WH2119
WH2119 (2) Nabrico 40 Ton Makeup Winches SOLD! YOU JUST MISSED THEM! Left and Right hand units Dogging tonnage is 40 tons Condition: solid steel units, turn freely Located in New York State Details
W2429
W2429 1979 41′ x 14’1 Twin Screw Aluminum UTB/ Workboat/Pilot Boat Price: $220,000 USD With fresh coatings and loads of updates, she’s ready to get to work! Former US Coast Guard
W2427
W2427 1974 31’6 x 8’5 Aluminum Work/Crew Boat & Trailer Price: $75,000 CDN This rugged workboat has been re-powered and she’s ready to get the job done! 18″ draft GRT:5.71
W2387
W2387 1985 21′ x 8′ Aluminum Work Boat w/ Trailer SOLD! YOU JUST MISSED IT!! Draft 32″ Shell plate thickness: 1/4″ bottom, 3/16″ sides and deck and pilothouse ***Requires
W2423
W2423 1995 19′ x 8’6 SeaArk Aluminum Work Boat Price: $30,000 USD She’s a small boat with a big heart and ready to get to work! 18″ draft Mercruiser 5.0 MPI, 260 hp VHF radio
E2772
E2772 Detroit Diesel 6-71 T Engine Price: $2,500 USD Right hand Good runner Bypass blower SAE #1 bell housing Located in: New York State Details are deemed to be correct but are not guaranteed and
E2720
File No.E2720 2006 CAT Marine Diesel Engines – C12 Engines (2) 340 hp @ 1800 rpm New Engines with 28 hours on them Set up for keel cooling Price: $30,000 USD Each Located in New York State
FV2154
File No. FV2154 1990 36′ x 9.3′ x 4.2′ Steel Trapnetter/Minnow Boat Price: $17,500 USD Powered by Chrysler 318, est 50 hours since rebuild Velvet drive transmission Cruising speed:
CR2098
CR2098 Appleton Marine Crane Price: $10,000 USD Model KEB50-35 10,000 lbs at 35′ 20,000 lbs at 25′ 30,000 lbs at 17′ Crane weighs approx 35,000 lbs Good condition Needs hydraulic
WH2118
WH2118 Ingersoll Rand Air Tugger BU 7A Price: $4,000 USD 1000-pound capacity Like new, tags are still on it! Located in New York State Details are deemed to be correct but are not guaranteed and
CR2097
CR2097 Esco CS1422 Clamshell Bucket Price: $2,500 USD Bushings and sheaves are in good mechanical shape and are free to roll Located in New York State Details are deemed to be correct but are not
PR2210
PR2210 RH 36″ x 32″, 3 Blade Propeller, 3.5″ Bore SOLD! Location: Southern Ontario Details are deemed to be correct but not guaranteed and should be independently verified. Please
C2065
C2065 1982 45′ x 14.5′ Gladding Hearn Built Crew Boat/Patrol Boat SOLD! Steel hull/aluminum cabin Gross Tonnage: 29, Net: 23 Light draft: 48″ approx Twin QSM11 535hp ea Diesel
G2320
G2320 Caterpillar D399 900 KW 347/600V Genset SOLD! 1200 RPM Total hours 1,800 Control panel Thomson Technology Muffler Main breaker No radiator Weight 25,000 pounds Dismantled and ready to go
A2088
A2088 6′ x 6′ Ship Anchor SOLD! YOU JUST MISSED IT! Weight approx. 4500 lbs Come with stone base Location: Michigan Details are deemed to be correct but are not guaranteed and should
W2313
W2313 1969 73′ x 17′ Halter built Aluminum Work Boat SOLD! Built by Halter Boats, New Orleans, LA Molded Depth: 3.05m, Draft 1.22m Gross tonnage: 43 tons Net tonnage: 32tons Shell plate
T2427
T2427 1966 41.9′ x 12.4′ Twin Screw Model Bow Tug SOLD! YOU JUST MISSED IT! Draft: Approx. 5′ 6″ GRT: 22, NRT: 10 Approximate displacement: 26,000 lbs. Shell plate thickness
CH2014
CH2014 NEW DATREX 30″ LIFE RINGS Call for price – Volume Discount Available Model DX0325D Polyurethane Foam Buoyant Material Fluorescent reflective strips White grab lines Weight 2.5 kg
CH2013
CH2013 NEW TAYLOR MADE MARKER BUOYS Price: $200 CDN EACH 2 green available, 1 red 49″ high, 10″ wide at top, 18″ at the widest part Sits 39″ above waterline Tough UV protected
EG2279
EG2279 ZF IRM301 1:1 GEAR Price: $1,600 CDN Suitable for a pleasure craft Made in Italy 2005 No drive ring available Southern Ontario Details are deemed to be correct but are not guaranteed and should
C2074
C2074 1969 29′ x 10.5′ Lafco Aluminum Crew Boat/Work Boat SOLD! Click for the video —> C2074 YouTube Video Listen to her engine –> C2074 Engine 3.5′ draft
PV2227
File No. PV2227 1984 78′ x 26′ x 4′ New Orleans Style Stern Wheeler Presently not available – She’s in drydock getting a facelift! Built by Freeport Shipbuilding
P2440
P2440 1989 32′ X 10’4 Steel Pleasure Trawler SOLD! YOU MISSED THIS ONE! Draft 2’6″ Powered by Volvo D2-40, 40hp, Serial #5015 08 15870, 450 hours Cruising speed 7 knots @ 2200
P2445
P2445 2012 31′ x 10′ Custom Steel Trawler w/Trailer SOLD! YOU JUST MISSED IT! Draft 3’9 31′ plus bow pulpit and swim platform Hull is 10 ga construction, cabins 12 ga Powered
W2421
W2421 2022 33′ x 12′ Heavy Aluminum Work Boat Price: $300,000 CDN Built BY marine contractors FOR marine contractors! Transport Canada licensed Team of 6 Canadian Welding Bureau certified
B2376
B2376 New Sectional Barges, Heavily Framed, Built to Last! Price: CALL FOR PRICING Built to order sectional barges Built BY marine contractors FOR marine contractors! 48 Years experience working on
M2123
Steel Boat Lift Price: $2,500 CDN or Best Offer Hydraulic lifting gear is powered by Honda 4-cycle engine Includes steel walkway as shown in photos Sold as is, where is (i.e. you disassemble)
P2447
P2447 2019 30′ x 10′ Steel Pleasure Tug w/Trailer SOLD! YOU JUST MISSED IT! Draft is 3.5′ at stern Shell plate thickness: 11 gauge Headroom: 6’2 Cruises at 7 mph, top speed 9
M2115
M2115 Yard Dolly/Transporter New Price: $3,900 CDN Excellent condition, freshwater use only Ex-USCG Suitable for boats up to 46′ Location: Greater Toronto Area, Ontario Details are deemed to
T2307
T2307 SOLD! YOU JUST MISSED IT! 1987 42′ x 14′ x 3’STEEL SHUGART PUSH BOAT MFG BY SHUGART MANUFACTURING VESSEL IS COMPRISED OF 4 SECTIONS THAT ARE PINNED TOGETHER VESSEL CAN BE
C2073
C2073 26′ x 11′ Aluminum Crew Boat SOLD! YOU JUST MISSED IT! Push knees Fendering Currently de-rigged Located in: Port Dover, Ontario Details are deemed to be correct but are not
W2420
W2420 2022 21′ x 6’8″ Aluminum Work Boat Price: $15,800 CDN 5′ bottom 3/16″ welded aluminum hull Located near Port Dover, Ontario Details are deemed to be correct but are
W2416
W2416 1992 27′ x 11′ Henley Aluminum Work Boat SOLD! YOU JUST MISSED IT This handy little crew or work boat runs like new! Draft: 2 1/2′ Powered by 350 Chevy with 290 Volvo
LC2132
LC2132 1976 134’9 x 29′ LCU SOLD! 4.5′ draft Powered by twin 12v71s Props are steerable kort nozzles with flanking rudders (2) 40 kw 3-71 generators 200 ton cargo capacity
LC2143
1995 30′ x 10’3″ Steel Landing Craft – 6 cyl Diesel w/ Azipod PRESENTLY UNAVAILABLE – CHECK BACK LATER Powered by in-line 6 cylinder Deutz Diesel w/ Azipod Bow gate door operated by crank
FV2156
FV2156 1945/1986 65′ x 20′ x 5′ Great Lakes Commercial Fishing Vessel SOLD! Details are deemed to be correct but are not guaranteed and should be individually verified Please
FE2045
FE2045 30″ Crossley Net Lifter w/Roller and Pan SOLD! Totally rebuilt recently, jaws, springs, etc Aluminum top Includes hydraulic pump attached to lifter Used only in fresh water (Lake
T2424
T2424 2019 16′ x 7′ Mini Tug w/ Trailer SOLD! You just missed it! Draft 2′ Powered by 15hp Yanmar 2 cyl engine with low hours Cruises at about 7 knots Hydraulic steering Steel hull,
A2095
A2095 Huge Folding Stock Anchor Circa 1830 Price: $11,000 USD Statement piece! This anchor dates to 1830 – 1860 This behemoth was pulled from the Atlantic by a Chincoteague
LC2140
2019 35′ x 10′ Landing Craft SOLD! 2′ draft Aluminum pilot house and sole Capacity approximately 3 ton Powered by 250hp Evinrude (2002), 350 hours since new Aluminum fuel tank 50
B2372
B2372 2022 17’6″ x 6’6″ x 22″ Steel Work Platform SOLD! YOU JUST MISSED IT! 10 gauge hull Motor bracket and 4 deck D rings Primed and painted Framed on 16″ centers
B2374
B2374 1990 85′ x 37′ x 5′ Landing Barge Price: $250,000 CDN Length incl ramps 133′ GRT: 87, Net: 26 Voyage class: sheltered waters Capacity: 12 cars 52 passenger, 2 crew
A2090
A2090 Large Folding Stock Anchor Price: SOLD! YOU JUST MISSED IT! 6′ across the flukes, shank is 9′ long Weight approx. 1,600 lbs Location: Maryland This is a large folding stock anchor.
A2094
A2094 Baldt 29 Stockless Anchor w/ Chain Price: $7,000 CDN 6′ tall, 4′ wide Weighs roughly 4,000 lbs 9 chain links 10″ long, 1 7/16″ diameter; 1 swivel; 1 D-ring Chain is
T2420
T2420 1954/1995 80′ x 20′ Russel Brothers 1000hp Tug SOLD! Details are deemed to be correct but are not guaranteed and should be independently verified. Please contact us for further
W2415
W2415 1959 40′ x 11′ Twin Screw Work Boat SOLD! YOU JUST MISSED IT Details are deemed to be correct but are not guaranteed and should be independently verified. Please contact us for
T2423
T2423 1951 45’x 13′ Army ST Tug SOLD! You just missed it! Draft 5′ Powered by Detroit 6-71 natural, approx 2,000 hours Allison 3:1 gear Fuel capacity: 900 gal Wheel is 40″ x
CR2096
CR2096 Kinshofer Model 632 Hydraulic Grapple Price: $5,000 USD Ser# 9708265, Model 632-2 Timber or railroad grapple Weight 290 kg Capacity 0.75 m² Max working pressure 200 bar Excellent condition
B2368
B2368 Flexifloat Barges – For Lease Only at This Time Price: 40′ x 10′ x 5′ (2 available) Price: 20′ x 10′ x 5′ (5 available) Last survey 2021
W2412
W2412 1996 18′ x 8′ Aluminum Landau Flat Bottom Workboat w/40hp Mariner & Trailer SOLD! YOU JUST MISSED IT! Comes with ShoreLand’r trailer This handy little workboat is ready to
CR2095
CR2095 2013 40 Ton Container Crane and Runway Price: On Request Made by Advanced Crane Technologies Bridge/Trolley Speed: 130 FPM Bridge Travel: 100′ Trolley Travel: 50′ Lift: 30′
T2421
T2421 1989 25′ x 10′ Truckable Pushboat SOLD! Also available for lease Runs and drives well Has been in fresh water only Draft 3.5′ Powered by Detroit 6-71 Flanking rudders Elevated
B2370
B2370 (2) 1995 30′ x 8.5′ x 6′ Double Walled Hopper Barges SOLD 27 yard capacity Empty weight 16,000 lb each Stackable Clean fresh water use only Set up for 4-point lifting Location:
WH2102
File No.WH2102 Markey Single Drum Towing Winch Price: SOLD! Model TDS-32 Wire Size: 2″ Drum Capacity: 2100′ Style: Single Drum Line Pull: 120,000 Diesel driven – Detroit Diesel with
M2118
M2118 Crown Order Picker New Price: $4,500 CDN Model 30SP42TT Serial No 1A1475954 Hours 198.3 Capacity: 3000 lbs Comes with battery charger – Exide, Model 666 Plus Location: Newfoundland
W2407
W2407 1989 28′ x 11’6″ Twin Screw Monark Work Boat SOLD! Aluminum 6 – 8 passenger Powered by Two (2) 250 hp Mercruiser with duo prop out drive Located in New York State File Ref W2407 Runs and
EG2274
EG2274 Twin Disc Marine Gear – MG 5091 3.83:1 Price: $11,500 CDN #1 Housing Expertly rebuilt Located in New Brunswick, Canada Details are deemed to be correct but are not guaranteed and should
EG2273
EG2273 Twin Disc Marine Gear – MG 509 4.5:1 Price: $12,500 CDN #1 Housing Expertly rebuilt Located in New Brunswick, Canada Details are deemed to be correct but are not guaranteed and should be
W2345
File No. W2345 1994 118′ x 44′ x 7′ Steel Trash Skimmer SOLD! Well equipped vessel ready for work! Vessel is all steel construction Built in 1994 to ABS Maltese A1 Standards. Built
LC2141
1988 30′ x 10′ Henley Aluminum Landing Craft SOLD! Good condition, ready to go! 3′ Draft Gross tons: 7 Cruising Speed: 28 mph Powered by twin Volvo 4 cyl turbo diesels (2007),
M2119
MI 30 Oil Recovery Skimmer New Price: $3,500 CDN Make Morris Model MI-30 Power pack- Yanmar diesel 320 pounds Location: East Coast of Canada Details are deemed to be correct but are not
W2413
W2413 1989 17′ Steel Tilbury SOLD! Blasted and 2 coats of primer, cleats and push rubber installed This handy little workboat is in great condition and ready to go! Located in Port Dover,
PR2211
PR2211 RH 32″ x 32″, 3 Blade Michigan Propeller, 2.5″ Bore Price: $1,500 CDN Needs a bit of work Location: Southern Ontario Details are deemed to be correct but not guaranteed and
PR2209
PR2209 RH 38″ x 32″, 4 Blade, Michigan Workhorse Propeller, 3.5″ Bore Price: $7,500 CDN Good used condition Location: Southern Ontario Details are deemed to be correct but not
EG2270
EG2270 Tonanco TM729S 3:1 RH Marine Gear SOLD! Equivalent to Twin Disc MG509 3:1 Good re-buildable takeout Right hand Comes w/ top PTO Location: Port Dover, Ontario Details are deemed to be correct
EG2269
EG2269 Tonanco TM828S 3:1 RH Marine Gear SOLD! 3:1 Good re-buildable takeout Equivalent to Twin Disc MG514 Right hand Location: Port Dover, Ontario Details are deemed to be correct but are not
EG2267
EG2267 Tonanco Marine Gear, TM828 S, 3:1 New Price: $10,000 CDN Serial No 1350 G Running take out Filter clean and good pressure Spin tested Oil leak on input shaft Equivalent to Twin Disc MG-514
B2165
File No. B2165 1990 60′ x 16′ x 6′ x ¼” Steel Spud Barge SOLD! YOU MISSED OUT ON THIS ONE! Barge is truckable with escort The bow is raked 45 degrees. Light draft is
M2122
Bow Thruster Price: $2,000 CDN Bow thruster has a 3 bladed fixed pitch propeller 9 ¾’’ x 24 FPP Prop is in a good condition. No dents, no mechanical damage, no cracks, no visible damage, etc.
M2121
Marker Buoy 6′ Diameter – 4 Available Price: $2,500 USD Heavy, durable construction Good condition Letter can be removed or changed Location: New York State Details are deemed to be
M2120
Used Heavy Duty D-Rubber Price: $500 USD per length – Quantity Discounts Available Up to 11′ lengths 70 lbs per ft Location: New York State Details are deemed to be correct but are not
W2411
W2411 1987/2006 25′ x 8′ Ex-Coast Guard Aluminum Work/Dive Boat SOLD! YOU MISSED OUT ON THIS ONE! Powered by twin 2005 Nissan (Tohatsu) 90hp TLDI oil injected 2-stroke outboards –
B2367
B2367 2013 27’8″ x 10′ x 1’9″ Steel Pontoon Work Barge w/ Trailer SOLD IN 14 DAYS! 3 pontoons 3/16″ steel Mercury 50hp motor, serviced and winterized annually Deck
P2439
P2439 1968 36′ X 11′ X 5’4′ Steel Twin Screw Trawler Price: $SOLD IN 33 DAYS! Gross Tonnage: 20.03 Net Tonnage: 13.8 Headroom: Wheelhouse 6’3″, Cabin
T2417
T2417 1971 50′ x 14′ x 2′ Ex Navy Twin Screw Cargo Tug Price: $35,000 USD Upgraded hull inside and out, freshly painted 2021 Bought in year 2000 Transmissions: Twin Disc hydraulic
T2416
T2416 1967 84’6 x 23’11 Steel Harbour Tug 1300 hp SOLD! GRT: 120, NRT: 65 Draft 3.5m Built by Jakobson Shipyard Inc. USA Main engines: twin GM 12V-71 TA, 2 x 650 hp Max speed: 9 knots
G2317
G2317 Hydraulic Generator – Mounts on Top of 514 or 5114 gears 12.5 KW Price: $10,000 CDN Located in Southern Ontario Details are deemed to be correct but are not guaranteed and should be
M2117
M2117 2016 18′ x 5′ Dock Price: $6,800 CDN 3′ high Wood over steel frame Never in water – used as model for home show 4 foam billets for floats Location: Eastern Ontario
PV2271
PV2271 1997 48’6 x 16′ GRP Passenger Vessel SOLD! Details are deemed to be correct but are not guaranteed and should be independently verified Please contact us for further
W2409
W2409 2015 20′ Steel Workboats (2 available) SOLD! The kind of nice rugged little workboat everyone should have! U-bench with fuel storage aft and raised foredeck Made in USA Located in: New
A2091
A2091 Russel Bros Ltd. Anchor “Fort Frances” “450 LBS” Price: $6,000 CDN Reads “Russel Bros Ltd Fort Frances” and “450 LBS” and “L5” Stock
WH2114
WH2114 (2) Timberland 10,000 kg Hand Winches Price: $Reasonable offers will be considered Max line pull 10,000 kg Ser No: 78-12886 Drum size approx: 12″ long x 7″ diam Each winch weighs 1
PR2206
PR2206 RH/LH 66″ x 68″, 4 Blade, Coolidge, Stainless Props, 6.5″ Bore Price: $5,000 USD each Weigh approx 3,000 lb each Usable, a couple tips might need a little TLC Removed from a
CR2093
CR2093 1999 Grove RT860 Price: $95,000 USD 5100 hours 60 ton capacity Good condition Two drums 115′ main boom 30′-60′ jib Ready to work Located in New York State Details are deemed
WH2113
WH2113 Air Winch Price: $3,000 CDN 15,000 lb capacity Located in Quebec Details are deemed to be correct but are not guaranteed and should be independently verified. Please contact us for further
WH2019
WH2019 Joy Air Tugger Winch 5000 lb pull 30hp Model B2F-211 Located in Quebec Price $5,250 CDN Details are deemed to be correct but are not guaranteed and should be independently verified.
G2313
G2313 Cummins/Onan Genset 30KW, 600V Price: $8,000 CDN c/w muffler Located in Quebec Details are deemed to be correct but are not guaranteed and should be independently verified. Used Generator for
D2138
D2138 2010 Portable Suction Dredge Price: $147,000 CDN Width: 8’6 Length: 26, Cutter Head 18′ Draft: 20″ 8″ Suction, 6″ Discharge Both sides can discharge or can be
B2361
B2361 SECTIONAL BARGES FOR LEASE Price: $Depends on Use and Duration, call for pricing 2009 – 2017 Poseidon and Flexi Float 10′ x 40′ x 5′ and 10′ x
E2743
E2743 CAT 3116 Marine Engine 300hp SOLD! LET US HELP FIND YOU ANOTHER! 300 hp @ 2300 rpm 700 hours Bobtail Water cooled Located in: Florida Details are deemed to be correct but are not guaranteed and
E2741
E2741 Yanmar 170 hp Marine Engine w/ZF 45 Gear Price $12,750 USD 170 hp @ 3200 rpm 2000 hours Model 4LH-HTE Water cooled Comes with ZF45 gear Located in: Florida Details are deemed to be correct but
T2410
T2410 1939 98’7 x 22′ x 9′ 1200 hp Tug Price: $250,000 USD GRT: 132, NRT 49 Built in Port Arthur, Texas by Gulfport Boiler & Welding Powered by EMD 12-567, 1200 hp, 5 hours since
S2044
S2044 1980 19.05m x 6m x 1.35m Steel Ex CCG Buoy Tender Built by Canadian Dredge & Dock Co.,Kingston, Ontario Class Voyage: Inland Waters II Taken out of service in 2010 Length (LOA): 19.05m
E2733
E2733 Single Cylinder, Simple Expansion, Vertical, Reversing Marine Steam Engine SOLD! Made by J. McCrae, Lindsay, Ontario 5″bore x 4″ stroke Located in Southern Ontario Details are deemed
CR2092
CR2092 Case CX240 LR Long Reach Excavator Price: $125,000 CDN 2600 hours w/ all new Trimble Instrumentation for a GPS system Located in Belleville, Ontario Details are deemed to be correct but are not
SP2226
File No.SP2226 Set of D2 Brass Kahlenberg Horns Price: $1,100 USD Removed from a NY commercial fishing vessel 20+ years old Located in NY State Details are deemed to be correct but are not
D2119
File No. D2119 2011 Mudcat MC-910 Aluminum ENV Suction Dredge Principal Dimensions and Characteristics Custom Built in 2011 Length Over All: 11.62 m 38.11 feet Width: 2.74 m 9 feet Height Over All:
FV2158
FV2158 1985 60′ x 20′ x 6′ Great Lakes Commercial Fishing Vessel Price: SOLD! Gross Tons: 68.09, Net Tons: 57.6 Powered by Volvo TMD-100 (new injectors 2018) Twin Disc Gear 3:1 Fuel
W2386
W2386 2011 26.48m x 11m Multicat Eurocarrier 2611 Price: Call for Pricing Draft 2.8 m (tanks 98% full) Deck space 125 metres², Deck load 6 tonne/sq metre Class: MCA Cat 1 150 miles from safe haven
T2286
File No. T2286 2008 47′ x 14.6′ x 5′ Steel Model Bow Tug Price:$400,000 CDN Built in Port Lambton, Ontario This tugboat is truckable Gross tonnage:18.14 tons Net tonnage:13.61 tons
E2735
E2735 6-71 Detroit Diesel Engines – 2 available Price $5,000 USD EACH 65kw @ 1200 rpm Removed from a tug Located in: South Carolina Details are deemed to be correct but are not guaranteed and
T2391
29.8m x 9m x 4m 1956 Tug – Class 1A Lloyd’s Ice Hull Price: $650,000 CDN – NEW PRICE! AVAILABLE AS A PACKAGE WITH T2402 – CALL FOR DETAILS 97’9″ x
FE2046
FE2046 Net Lifter Drive for 12″ Lifter Price: $250 CDN Location: Southern Ontario Details are deemed to be correct but are not guaranteed and should be independently verified. Please contact us
T2402
T2402 CLICK FOR A VIDEO OF THE ENGINE ROOM: ENGINE ROOM VIDEO 1978 76′ x 21′ x 8.5′ Fire Class Tug w/ Tractor Capabilities FOR CHARTER ONLY AT THIS TIME Available as a package
G2301
G2301 PICTURE COMING SOON (2) 6-71 3 Phase Gensets Price: $5,000 USD each Powered by 6-71 Removed from a tug Located in South Carolina Details are deemed to be correct but are not guaranteed and
E2731
E2731 (2) CAT 3160 Marine Engines SOLD! C/w twin disc MG506 3:1 gears 210 hp @ 2500 rpm Approx 4000 hours Good running condition Located in Quebec Details are deemed to be correct but are not
M2112
File No.M2112 Anchor House Number Price: $60 CDN 12 ga Steel Price: $120 CDN Stainless Steel 24″ tall x 18″ wide approximately Location: Port Dover, Ontario Details are deemed to
B2340
B2340 1998 192.9′ x 60′ x 14′ Deck Barge GRT: 1366, NT:409 Max Draft: 11.4′ Deck Load: 2500 lbs/square foot (approximate) Light Ship Weight: 555 LT (approximate) New Price:
M2111
File No.M2111 Locking Cast Aluminum Deck Plate – New – Lunenburg Foundries Price: $900 CDN Mounting ring O.D. 30″ , I.D. 26″ New, never installed With stainless locking lugs
PR2188
File No. PR2188 RH, 42″ x 26″, Columbian, 3 blade, 3″ bore SOLD! YOU MISSED OUT ON THIS ONE – WE CAN HELP FIND YOU ANOTHER Location: Port Dover, Ontario Details are deemed to
G2300
G2300 PICTURE COMING SOON (2) 60 kw, 110/220, 3 phase Gensets Price: $3,000 USD each Powered by 6-71 Removed from a tug Located in South Carolina Details are deemed to be correct but are not
T2398
T2398 1945 35′ x 9′ Russel Brothers Alligator Boat – Project Boat Price: $15,000 CDN Molded depth 4′, Draft 3′, Height 10.5′ Shell Plating: 1/4″ Headroom:
T2397
T2397 38′ x 10′ Russel Brothers Project Boat Price: $15,000 CDN Molded depth 5.5′, Draft 4′ Headroom: Wheelhouse – 6.5′, Cabin 6.5′, Engine room 6.5′
EG2261
File No.EG2261 Allison MH 30L 3:1 New Marine Transmission Price: Upon Request Location: New Jersey Details are deemed to becorrect but are not guaranteed and should be independently verified.
WH2106
File No.WH2106 Clarke Chapman Mooring Winches Price: $9,975 CDN each (6) available 8000 lb working load Good condition Located in Southern Ontario Details are deemed to be correct but are not
PR2184
PR2184 RH 44″ x 44″ 4 Blade, 4″ Bore, Nibral, Michigan Workhorse Excellent condition SOLD! Located in Southern Ontario Details are deemed to be correct but not guaranteed and should
SP2233
File No. SP2233 Unused 16” Port Lights Material: Stainless Steel Includes: Dead light covers Weld or Bolt in Quantity: 12 Price: $1,000 USD each Located in Louisiana Details are deemed to be correct
B2328
B2328 Price: $SOLD! 140′ x 40′ x 11.5′ Steel Deck Barge Bin wall on one side 5 compartments Needs work Location: NY State Details are deemed to be correct but are not guaranteed
PV2268
File No. PV2268 1977 50′ x 15′ Aluminum 98 Passenger Tour/Dinner Boat Price $325,000 CDN 98 passengers plus 3 crew Built in Canada Last survey 2012 Seating for 44 on lower level, 24 on
W2207
W2207 18′ 4″ x 94″ Custom Built Aluminum Tiller Boats Built in Ontario, Canada PRESENTLY UNAVAILABLE – CHECK BACK LATER Weight 946 lbs 30″ sides Cargo capacity is
G2296
File No. G2296 Perkins Diesel Generator 100KW Price: Call 519-583-1636 or email sms@scrutonmarine.com This Perkins diesel generator is suitable for continuous use and has plenty of power for
Email: sms@scrutonmarine.com 49 John Street, Port Dover, Ontario, N0A 1N7